Gold Mining Machine Shaking Table with High Recovery Rate
Model No.: 6s
6-S Gold Shaking Table, sometimes also known as wet tables, consist of a vibrating riffled deck mounted on some type of support. A motor, usually mounted separately off to the side, drives a small arm that shakes the table along its length. The riffles are usually not more than half an inch high and cover only about half the table surface. Varied riffle designs are available for specific types of applications. Shaking tables are very efficient at recovering heavy minerals from minus 100 microns (150 mesh) down to 5 microns in size. Heavy minerals of a size greater than 150 mesh are better run through a jig.
Application of 6-S Gold Shaking table:
Gold shaking table is a mine separation device for fine minerals working by gravity. They are effective in processing precious and base metal, rare metal and non-metallic minerals, widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc.
6-S Gold shaking table is one of the main equipment of gravity concentration , it is widely used in the selection of tungsten, tin , tantalum, niobium and other rare metals and precious metal ore .
It can be used for Roughing, concentrating, scavenging different operations , Separating coarse sand ( 2- 0.5mm) , fine sand ( 0.5 - 0.074mm ), slime or clay ( -0.074mm ), different grain grade size . Can also be used to separating the iron, manganese ore and coal . When processing other minerals such as tungsten, tin , the table effective recycling particle size range for the 2-0.22 mm.
Working principle of 6-S Gold Shaking table
6-S Gold Shaking table beneficiation process is conducted in a copy of the tilt table, ore grain group from the Angle of mesa Feeder trough into, by lateral flushing water supply for the sink at the same time, under the influence of vibration wave, according to the proportion and granularity theory, and vertical movement and lateral movement. YanTai proportion and granularity of different ore grain along the movement direction of the respective trapezoidal shed, respectively from the concentrate and tailings discharge side of different position, the final is divided into concentrate, middlings and tailings.
4 Different types Base Support frame and Installations words:
A choice of 6-S fixed shaking table, 6-S small channel bar shaking table, 6-S big channel steel shaking table and 6-S Double deck Shaking table are available.
Feathers of 6-S Gold Shaking table
-Classification, Concentration, Recovery of Metals, Minerals from Placer or Alluvial Fields.
-Works as a Wash Plant, Gravity Separation Plant for small to medium size Dredging Operation.
-Classification, Pre-Concentration & Recovery of Primary (Hard Rock) deposits of Gold, Base Metals, Ferrous Metals, Diamonds and other Minerals.
Technical parameter of Common size 6-S Gold Shaking table
|Name||Coarse sand surface of table||Fine sand surface of table||Ore slime surface of table|
|Table surface |
|Transmission end width (mm)||1855||1855||1855|
|crude ore width (mm)||1546||1546||1546|
|Max. feeding size (mm)||2||0.5||0.15|
|Feed amount (t/h)||30-60||10-20||15-25|
|Feed density (%)||25-30||20-25||15-25|
|Frequency ( f)||45-48||48-53||50-57|
|Water quantity added(t/h)||80-150||30-60||10-17|
|Horizontal obliquity (°)||2°30′-4°30′||1°30′-3°30′||1°-2°|
|Longitudinal obliquity (°)||1.4||0.92||--|
|Dressing Area (m2)||7.6||7.6||7.6|
|Cross-section Shape of table surface||Rectangular||Saw tooth||triangle|
|Motor Power (kw)||1.1||1.1||1.1|
|Transmission Mechanism||Eccentric linkage|
Technical Parameter of Smaller Lab Shaking table (Have small base support)
|Deck surface |
|3000 X1620 X1360||2100 X 1050 X 850||1100 X 500 X 430|
|Time of stroke (times/min.)||210-320||250 - 450||280 - 460|
|Horizontal obliquity (°)||0-10||0-8||0-10|
|Max. feeding size (mm)||Ore sand surface||<2||< 2||< 2|
|Ore slime surface||<0.1||< 0.074||< 0.074|
|Feed density (%)||10-30||10-30||10-30|
|Capacity (t/h)||Ore sand||0.7-1.5||0.4-0.8||0.1-0.2|
|Water quantity added(t/h)||0.3-1.5||0.2-1||0.1-0.8|
|Motor||Model||Y 100L -4||Y 90L -4||Y 80L -4|
|Whole Outline size (mm)||4075 X 1620 X 1360||3040 X 1050 X 850||1530 X 500 X 430|
Structure of 6-S Gold Shaking table:
Head motion: 6-S Shaking table cast iron to contain an oil reservoir for perfect splash lubrication. This feature protects the moving parts, reducing operating and maintenance costs to a minimum.
Our company was established in 1995 with the registered capital of 1000000. We have more than 100 staffs: 18 research engineers ,60 technicians and expencienced after-sale service team. Our company covers an area of 20000 square meters and wons several awards of excellent local enterprise .We are acknowledged as the backbone enterprises in metallurgical industry.
We will provide you with the prior plan, process flowchart design and production equipment in line with your special needs.
We will send technicians to you for guiding the equipment installation, commissioning and staff
We will regularly pay return visit to customers for establishing a long-term and friendly relationship.
All machines have one year warranty to make sure your machine work well.
Warmly welcome you come to visist our factory
Our factory located at Ganzhou city, Jiangxi province, China.
Visit line: Take flight from your country to Guangzhou airport in China, and then take flight from Guangzhou to Gan zhou airport, then we will send the car to pick you up from Ganzhou airport.
Contact Person: Iris Huang
Mobile: 008618870736160 Contact us if you need more details on Gold Washing Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Placer Alluvial Gold、Gold Shaking Table. If these products fail to match your need, please contact us and we would like to provide relevant information.